Headlight Leveling Switch (If So Equipped) - Mitsubishi 2010 RVR Owner's Manual

Features and controls
Headlight leveling switch
The direction of the headlight beam (the direction in which the
light shines) alters according to the number of people and the
load in the vehicle. Lower the headlight angle if it is too high
due to the number of people and/or the load in the vehicle so
that the headlights' glare does not distract the drivers of
approaching vehicles. First set the light switch to the "
position, then turn the headlight leveling switch knob to lower
the beam. The greater the number on the headlight leveling
switch knob, the lower the beam will point.
Set the switch to the appropriate position so that the headlight
beam is level with the road.
3
3-190
(if so equipped)
N00537100105
NOTE
"
WARNING
!
To avoid distraction while driving, always perform
headlight adjustments before vehicle operation.
Start adjusting when the knob is at the "0" position (when
the beam is at its highest).
Keep the knob in the "0" position except when using the
knob to lower the headlight beam angle.
Always return the knob to the "0" position when the load
is removed and the people have left the vehicle.