Mitsubishi 2010 RVR Owner's Manual page 202

CAUTION
!
When display/indicator blinks, ASC is operating,
which means that the road is slippery or that your
vehicle's wheels are beginning to slip. If this hap-
pens, drive slower with less accelerator input.
If the temperature in the braking system continues
to increase due to continuous brake control on a
slippery road surface, the
blink. To prevent the brake system from overheat-
ing, the brake control of the traction control func-
tion will be temporarily suspended.
The engine control of the traction control function
and normal brake operation will not be affected.
Park your vehicle in a safe place. When the temper-
ature in the braking system has come down, the
display/indicator will be turned off and the traction
control function will start operating again.
NOTE
The display/indicator may turn on when you start the
engine. This means that the battery voltage momentarily
dropped when the engine was started. It does not indicate
a malfunction, provided that the display goes out immedi-
ately.
When a compact spare tire has been put on your vehicle,
the gripping ability of the tire will be lower, making it
more likely that the display/indicator will blink.
display/indicator will
ASC warning display
If an abnormal condition occurs in the system, the following
display/indicator will turn on.
ASC indicator
-
ASC OFF display/ASC OFF indicator
-
Warning display type 1
Warning display type 2
NOTE
The combination of items shown on the display varies
depending on the vehicle model.
Features and controls
N00546600076
3
3-105