Mitsubishi 2010 RVR Owner's Manual page 251

Features and controls
NOTE
If the battery is disconnected, the memory of the language
cooperative control is erased and is automatically set to
"A" (language cooperation: enabled).
The language display modified with the language setting
can be switched in the following manner.
• When "A" (language cooperation: enabled) has been
selected with the language cooperative control, the lan-
guage for Mitsubishi Multi-Communication System (if
so equipped) or Bluetooth
equipped) is automatically changed to the language
selected for the multi-information display.
• When "M" (language cooperation: disabled) has been
3
selected with the language cooperative control, the lan-
guage for Mitsubishi Multi-Communication System (if
so equipped) or Bluetooth
equipped) is not automatically changed to the language
selected for the multi-information display.
Operation sound setting
You can turn off the operation sounds of the multi-information
meter switch and rheostat meter illumination button.
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch or operation mode is in ON)" on page 3-146.
2. Lightly press the multi-information meter switch to select
" " (operation sound setting).
3-154
®
2.0 interface (if so
®
2.0 interface (if so
N00557400117
Type 1
Type 2
3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch in sequence from ON
(operation sound on) → OFF (operation sound off) → ON
(operation sound on).
The setting is changed to the selected condition.