Mitsubishi 2010 RVR Owner's Manual page 244

NOTE
To return the menu screen to the function setting screen,
press and hold the multi-information meter switch (for
about 2 seconds or more).
If no operations are made within about 15 seconds of the
menu screen being displayed, the display returns to the
function setting screen.
4. Select the item to change on the menu screen and change
to the desired setting. For further details on the operation
methods, refer to the following sections .
Refer to "Changing the reset mode for average fuel con-
sumption and average speed" on page 3-147.
Refer to "Changing the fuel consumption display unit" on
page 3-149.
Refer to "Changing the temperature unit" on page 3-151.
Refer to "Changing the display language" on page 3-152.
Refer to "Changing the language on Mitsubishi Multi-
Communication System or Bluetooth
match the multi-information display (if so equipped)" on
page 3-153.
Refer to "Operation sound setting" on page 3-154.
Refer to "Changing the time until "REST REMINDER" is
displayed" on page 3-155.
Refer to "Changing the turn signal sound" on page 3-156.
Refer to "Changing the momentary fuel consumption dis-
play (Type 2)" on page 3-157.
Refer to "Returning to the factory settings" on page 3-
158.
Changing the reset mode for average fuel consumption
and average speed
You can change the mode condition for the average fuel con-
sumption and average speed display to "Auto reset" or "Man-
ual reset."
1. Press and hold the multi-information meter switch (for
2. Lightly press the multi-information meter switch to select
®
2.0 interface to
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch or operation mode is in ON)" on page 3-146.
"AVG" (average fuel consumption and average speed set-
ting).
Features and controls
N00557000139
3
3-147