Mitsubishi 2010 RVR Owner's Manual page 428

To skip or lock a desired channel - MENU mode
You can set the satellite radio so that it locks a desired channel
or skips the channel during channel selection.
1. While the satellite radio is tuned in to the channel, press
the TUNE/SOUND switch for about 2 seconds or longer
to enter the MENU mode.
2. In the MENU mode, the satellite radio channel SKIP set-
ting and LOCK setting are possible.
Each time you press the TUNE/SOUND switch, the status
will change in the following sequence.
"SKIP SETTING" (SKIP setting mode) → "LOCK SET-
TING" (LOCK setting mode) → "SCV ON" → "PHONE
OFF" → MENU mode off.
NOTE
The MENU mode will automatically shut off when either
the radio or CD is selected, when the TUNE/SOUND
switch is pressed for about 2 seconds or longer, or when
the radio is left alone for 10 seconds.
The SKIP settings, LOCK settings and lock cancellation
code are stored in memory.
Disconnecting the battery cable will erase these settings.
(The lock cancellation code will reset to the factory set-
ting: "1111".)
For more information on the SCV function, refer to
"Speed Compensated Volume function" on page 5-52.
"PHONE OFF" is displayed but the function is not
enabled.
If the vehicle is equipped with a Mitsubishi Motors autho-
rized hands-free phone system, "PHONE OFF" will not
be displayed.
"SKIP SETTING" (SKIP Setting Mode)
You can set any channel to be skipped during channel selec-
tion. You can also cancel a skip setting.
You can turn the TUNE/SOUND switch and select "SKIP CH"
or "UNSKIP ALL".
These functions are described below.
SKIP CH: Sets the satellite radio so that it skips
the channel that is currently being
received.
UNSKIP ALL: Cancels skip setting on all channels.
"LOCK SETTING" (LOCK Setting Mode)
You can lock any channel of your choice or unlock a locked
channel.
You can turn the TUNE/SOUND switch and select "LOCK
CH" (or "UNLOCK CH"), "UNLOCK ALL" or "CODE
EDIT".
These functions are described below.
LOCK CH: Locks the channel that is currently
being received.
UNLOCK CH: Unlocks the channel that is currently
being received.
UNLOCK ALL: Cancels lock setting on all channels.
CODE EDIT: Changes the lock cancellation code.
NOTE
If the channel that is currently being received is not
locked, you can select "LOCK CH"; if it is locked, you
can select "UNLOCK CH".
Comfort controls
5
5-59