Mitsubishi 2010 RVR Owner's Manual page 200

Traction control function
On slippery surfaces, the traction control function prevents the
drive wheels from spinning excessive, thus helping the vehicle
to start moving from a stopped condition. It also provides suffi-
cient driving force and steering performance as the vehicle
turns while pressing the acceleration pedal.
CAUTION
!
When driving a vehicle on a snowy or icy road, be
sure to install snow tires and drive the vehicle at
moderate speeds.
Skid control function
The skid control function is designed to help the driver main-
tain control of the vehicle on slippery roads or during rapid
steering maneuvers. It works by controlling the engine output
and the brake on each wheel.
NOTE
The skid control function operates at speeds of about 9
mph (15 km/h) or higher.
ASC OFF switch
N00559200021
The ASC is automatically activated when the ignition switch is
turned to the "ON" position or the operation mode is put in
ON. You can deactivate the system by pressing down the "ASC
OFF" switch for 3 seconds or longer.
When the ASC is deactivated, the
on. To reactivate the ASC, momentarily press the "ASC OFF"
switch ; the display/indicator is turned off.
N00559300019
Features and controls
N00559400182
display/indicator will turn
3-103
3