Mitsubishi 2010 RVR Owner's Manual page 458

To play tracks in random order (if supported by the
device)
Press the RDM button to show "RDM" in the display.
The system randomly selects and plays tracks from all tracks in
®
the Bluetooth device.
To exit this mode, press the button again.
To find the start of each track for playback (if supported
by the device)
Press the SCAN button. "SCAN" is shown in the display and
®
all tracks in the Bluetooth
mately 10 seconds from the beginning.
To exit this mode, press the button again.
To switch the display (if supported by the device)
The system can display tag information.
1. Press and hold the DISP button until you hear a beep to
show "TAG" in the display.
N00766000023
N00766100024
device are played for approxi-
N00766200025
2. The display changes as follows every time the DISP but-
ton is pressed briefly:
Album title → Title name → Artist name → Genre
→ Normal display
Example
Album title
Title name
Artist name
NOTE
Press and hold the DISP button again until you hear a
beep, and the tag information disappears.
Up to 10 characters are shown in the display at once. If the
title is cut off in the middle, press the PAGE button. The
next characters are displayed every time this button is
pressed.
If no title is stored, "NO TITLE" is shown in the display.
Characters that cannot be displayed are substituted
by " • ".
Comfort controls
5
5-89