Mitsubishi 2010 RVR Owner's Manual page 172

Set the selector lever in the gate to operate while the
brake pedal is depressed.
Set the selector lever in the gate to operate.
WARNING
!
Always press the brake pedal when shifting the
selector lever into a selector position from the "N"
(NEUTRAL) position.
When beginning to drive, do not shift the selector
lever from the "N" (NEUTRAL) position while
pressing the accelerator pedal. This will cause the
vehicle to "jump" forward or backward.
NOTE
To prevent mistakes in operating the lever, make sure you
stop briefly at each position. After operating, check the
position in the multi-information display.
If the brake pedal is not depressed and held, the shift-lock
device activates to prevent the selector lever from being
moved from the "P" (PARK) position.
For a shift indicated by
brake pedal before moving the selector lever. If you
attempt to move the selector lever before depressing the
brake pedal, the selector lever may be immovable.
Features and controls
in the illustration, depress the
3-75
3