Mitsubishi 2010 RVR Owner's Manual page 270

Other interrupt displays
Screen type 1 Screen type 2
—
—
System operation status
When starting the engine, you pressed
the engine switch without depressing
the clutch pedal (manual transaxle).
When starting the engine, the selector
lever is in a position other than the "P"
(PARK) or the "N" (NEUTRAL) posi-
tion, or you pressed the engine switch
without depressing the brake pedal
(CVT).
Features and controls
Reference
On vehicles with manual transaxle,
place the gearshift lever in the "N"
(Neutral) position, fully depress the
clutch pedal, depress and hold the
brake pedal with the right foot, and
then press the engine switch to start the
engine.
Refer to "Starting and stopping the
engine" on page 3-26.
On vehicles with CVT, place the selec-
tor lever in the "P" (PARK) position,
depress and hold the brake pedal with
the right foot, and then press the engine
switch to start the engine.
Refer to "Starting and stopping the
engine" on page 3-26.
N00558200167
3
3-173