Mitsubishi 2010 RVR Owner's Manual page 285

Features and controls
Welcome light
This function turns on the front side-marker and parking lights
for about 30 seconds after the UNLOCK button (A) on the
remote control transmitter is pressed when the combination
headlights and dimmer switch is in the "OFF" or "AUTO"
position (for vehicles equipped with the automatic light con-
trol). On vehicles equipped with the automatic light control,
the welcome light function will operate only when it is dark
outside the vehicle.
3
NOTE
While the welcome light function is operating, perform
one of the following operations to cancel the function.
3-188
• Push the LOCK button (B) on the remote control trans-
mitter.
N00563200064
• Turn the combination headlights and dimmer switch to
the " " or "
• Turn the ignition switch to the "ON" position or put the
operation mode in ON.
It is possible to modify functions as follows:
• The headlights can be set to come on in the low beam
setting.
• The welcome light function can be deactivated.
For details, consult a Mitsubishi Motors dealer.
On vehicles equipped with Mitsubishi Multi-Communica-
tion System, screen operations can be used to make the
adjustment.
Refer to the separate owner's manual for details.
" position.