Mitsubishi 2010 RVR Owner's Manual page 205

Features and controls
To activate
1. With the ignition switch is in "ON" position or the opera-
tion mode is in ON, press the "ON OFF" switch (A) to
turn on the cruise control. The "CRUISE" indicator light
in the meter cluster will come on.
3
3-108
NOTE
If the cruise control is on when the following operation is
N00518400330
performed, cruise control will be on automatically the
next time you start the engine. The "CRUISE" indicator
light will also be on.
[Except for vehicles equipped with the F.A.S.T.-key]
Turn the ignition switch to the "LOCK" or "ACC" posi-
tion.
[Vehicles equipped with the F.A.S.T.-key]
Put the operation mode in OFF or ACC.
If the battery voltage is insufficient, the memory data for
the cruise control may be erased.
As a result, the "CRUISE" indicator light may not come
on when you restart the engine.
If this happens, press the "ON OFF" switch once again to
turn on the cruise control.