Mitsubishi 2010 RVR Owner's Manual page 241

Features and controls
To reset
The "---" display can be reset while the ignition switch or the
operation mode is in OFF. When the display is reset, the time
until the next periodic inspection is displayed and the warning
display is no longer displayed when the ignition switch is
switched from the "LOCK" position to the "ON" position or
the operation mode is changed from OFF to ON.
1. When you lightly press the multi-information meter
switch, the information screen switches to the service
reminder display screen.
Type 1
3
Type 2
3-144
2. Press and hold the multi-information meter switch (for
about 2 seconds or more) to display " " and make it
flash. (If there is no operation for about 10 seconds with
this indicator flashing, the display returns to the previous
screen.)
3. With this indicator flashing, if you lightly press the multi-
information meter switch, the screen switches from "---"
to "CLEAR". After that, the time until the next periodic
inspection is shown.
Type 1
Type 2