Mitsubishi 2010 RVR Owner's Manual page 398

Personalizing the air selection (Changing the function
setting)
You can change the following functions to match your prefer-
ence.
Enable automatic air control:
When the mode selection dial or the blower speed selec-
tion dial is set to the "AUTO" position, the air selection
switch will also be automatically controlled.
Disable automatic air control:
Even when the mode selection dial or the blower speed
selection dial is set to the "AUTO" position, the air selec-
tion switch will not be automatically controlled.
Changing the settings
Press the air selection switch for about 10 seconds or
longer.
When the setting has changed, the system will beep and
the indicator light will flash.
• When the setting has changed from enabled to disabled,
the system will beep three times and the indicator will
flash three times.
• When the setting has changed from disabled to enabled,
the system will beep two times and the indicator light
will flash three times.
NOTE
The factory setting is "Enable automatic air control".
While the mode selection dial is set between "
N00760000018
" " position, the air selection will automatically change
to the outside air position, even if the system is set to
"Disable automatic air control", in order to prevent win-
dows from fogging up.
Comfort controls
" and
5
5-29