Seat Belts - Mitsubishi 2010 RVR Owner's Manual

Table of Contents

Advertisement

Seat and restraint systems
5. After making sure that the seat belt is not twisted, insert
the small latch plate (E) into the detachable anchor (F)
aligning the marks (G) on the plate and buckle until a
"click" is heard. Make sure the detachable anchor is
securely latched and seat belt is not twisted. For details,
refer to page 2-23.
2
WARNING
!
Using the rear center seat belt with the detachable
anchor unlatched increases the risk of serious injury
or death in an accident. Make sure the detachable
anchor is properly latched.
2-18

Seat belts

Seat belts are installed in your vehicle to help reduce the risk of
injury to the driver and passenger in the event of an accident.
Always use the provided seat belts.
Carefully review the following information for proper seat belt
usage.
WARNING
!
To help reduce the risk of injury or death in an acci-
dent, seat belts and child restraint systems must
always be used. Refer to "Child restraint systems"
on page 2-31 for additional information.
Never use one seat belt for more than one person.
Never carry more people in your vehicle than there
are seat belts.
Always adjust the seat belt for a snug fit.
Always place the shoulder belt over your shoulder
and across your chest. Never put it behind you or
under your arm.
Always wear the lap belt as low as possible across
your hips, not around your waist.
Never modify or alter the seat belts in your vehicle.
To reduce the risk to the driver of serious injury or
death during deployment of the driver's airbag,
always properly wear the seat belt and adjust the
driver's seat as far back as possible while maintain-
ing a position that still enables you to fully apply the
pedals, easily control the steering wheel, and safely
operate the vehicle.
N00406000442

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 outlander sport

Table of Contents