Contact springs kit removal
See
for the part number.
page 7-13
Toner cartridge contacts removal
Remove the LVPS. See
1.
Remove the printhead. See
2.
3.
Remove contact spring cables from the cable restraints (A).
Note: Pay attention to the routing of the cartridge contact cables, and the appropriate slots where each
cartridge contact is installed.
"Low-voltage power supply (LVPS) removal" on page
"Printhead removal, installation, and adjustment" on page
A
5026
4-127.
4-153.
Repair information
4-83
Previous
Next
Go Back