Table of Contents
Advertisement
Registration (black)
Top Margin
Reconnect the power cord to the electrical outlet, but do not turn on the printer yet.
1.
Enter Diagnostic mode (press and hold buttons 3 and 6, turn on the printer, and release the buttons when
2.
the clock graphic displays).
Touch REGISTRATION.
3.
Touch Quick Test or use the last Quick Test you used to adjust skew.
4.
Touch Top Margin.
5.
6.
Adjust the values until both top alignment marks are on the top edge of the print.
Increasing the value (+) moves the top alignment marks down on the page.
•
Decreasing the value (-) moves the top alignment marks up on the page.
•
Touch
to save the value.
7.
Print the Quick Test page, and check the top alignment marks. Repeat adjustment of the top margin and
8.
printing of the Quick Test page until top margin is set.
Bottom Margin
Touch Bottom Margin.
1.
Adjust the bottom margin until the points of the bottom margin alignment marks are visible and touching
2.
the edge of the paper.
Increasing the value (+) moves the bottom alignment marks up on the page.
•
Decreasing the value (-) moves the bottom alignment marks down on the page.
•
Touch
to save the value.
3.
Print the Quick Test page, and repeat this process until the bottom margin is adjusted.
4.
5026
Repair information
4-23
Previous
Next
Go Back
Advertisement
Table of Contents
