Lexmark C746n Service Manual page 42

5026
Use the
4 Sleep button
5 Stop/Cancel button
6 Indicator light
7 USB port
Service Manual
2-4
To
Enable Sleep mode.
The following are the statuses based on the indicator light and the Sleep
button:.
• Entering or waking from Sleep mode
- The indicator light is illuminated solid green.
- The Sleep button is un-illuminated.
• Operating in Sleep mode
- The indicator light is illuminated solid green.
- The Sleep button is illuminated solid amber.
• Entering or waking from Hibernate mode
- The indicator light is illuminated solid green.
- The Sleep button is illuminated blinking amber.
• Operating in Hibernate mode.
- The indicator light is un-illuminated.
- The Sleep button is blinking amber for 0.1 second, and then goes
completely un-illuminated for 1.9 seconds in pulsing pattern.
The following actions wake the printer from Sleep mode:
• Pressing any button
• Touching the screen
• Opening Tray 1 or loading paper in the multipurpose feeder
• Opening a door or cover
• Sending a print job from the computer
• Performing a Power On Reset (POR) with the main power switch.
• Loading paper into the scanner ADF.
• Raising the scanner flatbed cover.
Stops all printer activities.
Note: A list of options are displayed once Stopped appears on the display.
Check the status of the printer.
Indicator light
Indicates
status
Off Printer power is off.
Blinking green Printer is warming up, processing data, or
printing a job.
Solid green Printer is on, but idle.
Blinking red Operator intervention is required.
Connect a USB Bluetooth adapter or a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Previous
Next
Go Back