5026
HCIT pick arm roll removal
Remove the high-capacity input tray (HCIT) media tray assembly. See
1.
removal" on page
Pull the auto compensator pick arm (A) down.
2.
3.
Remove the pick arm roll (B) from the pick roll assembly (C).
Repeat for the other pick arm roll (D).
4.
Note: Always replace the pick arm rolls as pairs.
Installation notes:
See
"Pick arm roll removal and replacement" on page 4-151
correctly.
Service Manual
4-210
4-201.
A
B
C
D
to make sure the pick arm roll is oriented
"HCIT media tray assembly
Previous
Next
Go Back