Operator Panel Assembly Removal (C748) - Lexmark C746n Service Manual

Remove the operator panel LCD from the LCD protector.
9.
Note: The operator panel assembly consist of the operator panel LCD and the operator panel card.

Operator panel assembly removal (C748)

See operator panel assembly with card on
Warning: This part might contain customer confidential information. See
for more details. After removing this part, return it to your next level of support so any data can be
removed. If the customer requests to keep the part, they must sign a confirmation of memory device
retention form.
Warning: When replacing any one of the following components:
•
Operator panel assembly
•
System board
•
Top access cover assembly
Only replace one component at a time. Replace the required component, and perform a POR before
replacing a second component listed above. If this procedure is not followed, the printer will be
rendered inoperable.
Remove the top access cover assembly. See
1.
Turn the top access cover assembly over.
2.
for the part number.
page 7-3
"Top access cover assembly removal" on page
"Data Security Notice" on page 4-1
Repair information
5026
Previous
Next
Go Back
4-54.
4-37