Figure 8-11A: Azimuth Pot - Top View; Figure 8-11B: Azimuth Pot - Side View - SeaSpace TeraScan 1.5M Operation And Maintenance Manual

12. Reattach the azimuth pot connector to its junction. Note that there is a 6-pin junction and only
5 conductors.
13. Dress and tie-wrap the azimuth pot cable to the other cables so it will not snag on the antenna as the
antenna moves.
14. Calibrate the azimuth pot (section 8.5.13, page 157).
Diagnostics After Repair:
Perform the tests of section 5.1, page 83, and observe the correct operation of the antenna, especially the
azimuth motions.
Azimuth Pot - Top View
F 8-11A:
IGURE
Azimuth Pot - Side View
F 8-11B:
IGURE
TeraScan 1.5m Polar Satellite Tracking Antenna O & M Manual 131
pot bracket screws
azimuth pot sprocket
azimuth pot
azimuth pot cable
azimuth pot
azimuth pot
sprocket
drive belt
azimuth pot cable
drive belt