Setting Up A Ddns Address - Wirepathdns - Wirepath Surveillance WPS-750-DOM-IPH Installation Manual

WPS-750-DOM-IPH Installation Manual
10.3.7.4. Setting Up a DDNS Address – WirepathDNS
A. To use Wirepath DDNS service, enable the DDNS feature by selecting the button.
B. Enter a prefix for the address in the host name field as shown in the example above (system1).
C. Click "Apply" in the bottom right corner to save the address. After a moment, the page will reload and the address will appear in
the "State" box as shown below:
D. DDNS is now correctly set up. To complete setup for remote access, log into the router and forward the port for the camera to
its IP address.
40