Advanced Ip Settings - Qos/Dscp; Qos / Dscp Setting - Wirepath Surveillance WPS-750-DOM-IPH Installation Manual

10.3.5. Advanced IP Settings - QoS/DSCP

Quality of Service (QoS) is used within a network to define priority levels for selected traffic. This allows for a higher level
of bandwidth to be used whenever a particular type of traffic is being sent to avoid latency and packet loss. The network
administrator should be consulted before enabling this feature.
For example: Video streams require more bandwidth than email notifications. By assigning a higher DSCP (Differentiated Services
Code Point) number to video streams guarantees the quality of the stream on the network.
• Navigation: Log in as an administrator. From Home Screen, click "Config" button in top right corner, then click "Advanced" in
left column, then click "QoS/DSCP" from the sub-menu that opens.

10.3.5.1. QoS / DSCP Setting

Enable QoS/
1
DSCP
Live Stream
Event/Alarm
Management
Click "Apply" at the bottom right of the page to save modified settings.
© 2014 Wirepath Surveillance
1
Check the box to enable this feature.
Enter a DSCP value between 0 and 63 to use when live stream traffic is being sent across the network.
Enter a DSCP value between 0 and 63 to use when event/alarm traffic is being sent across the network.
Enter a DSCP value between 0 and 63 to use when management traffic is being sent across the
network.
WPS-750-DOM-IPH Installation Manual
37