Table of Contents
Advertisement
WPS-300-CUB-IP Installation Manual
9.3.7.4.
Setting Up a DDNS Address – WirepathDNS
A.
To use Wirepath DDNS service, enable the DDNS feature by selecting the button.
B.
Enter a prefix for the address in the host name field as shown in the example above (system1).
C. Click "Apply" in the bottom-right corner to save the address. After a moment, the page will reload and the address will appear in
the "State" box as shown below:
D. DDNS is now correctly set up. To complete setup for remote access, log into the router and forward the port for the camera to
its IP address.
40
Advertisement
Table of Contents
