Pppoe & Ddns Settings; 1-Pppoe Settings; 2-Ddns Settings - Wirepath Surveillance WPS-750-BUL-IP Installation And User Manual

WPS-750-BUL-IP Installation Manual
12.6- PPPoE & DDNS Settings
Pg. 30
12.6.1- PPPoE Settings
Point-to-Point Protocol Over Ethernet (PPPoE) is a network protocol primarily used DSL (Digital Subscriber
Line) providers and modems. This protocol requires a login to connect to the modem even when a router is
used. Configuration of these settings is not required to operate the camera on a standard network.
PPPoE Enable to use PPPoE to access the Camera.
Username Login name from the service provider
Password Password for the above username.
Send Mail Enable to send an Email when the PPPoE is dialed.
12.6.2- DDNS Settings
DDNS (Dynamic DNS) maps Internet Domain Names to an IP through services like Wirepathdns.com.
When configured, the Camera is available remotely via a simple easy to remember name such as
JonesIPCamera.Wirepathdns.com
Configuring DDNS is not required for remote access, but avoids having to pay for and remember a static IP
address from the ISP.
See Section 5- Configure Camera for Remote Access
DDNS Enable to allow configuring and using a DDNS service.
Provider Name of the DDNS service provider.
Hostname Name to use when accessing the Camera remotely.
Example: JonesIPcamera.
State Current connection status of the DDNS service.
This field will update automatically shortly after entering and applying a
Hostname.
for details on configuring remote access.
© 2013 Wirepath™ Surveillance