Camera Web Browser Interface; Web Interface Layout - Top Bar - Wirepath Surveillance WPS-750-DOM-IPH Installation Manual

9.2. Camera Web Browser Interface

The web browser Home screen displays video and current information from the camera feed. The camera name, time signature,
video frame size and frames per second (FPS) being streamed are all displayed by default. Use the drop-down menus and buttons
to interact with the cameras inputs and outputs, change the stream, or enter the setup menus.

9.2.1. Web Interface Layout - Top Bar

(Buttons are enlarged for reference)
1. Video (Full-screen Mode)
Click to expand the view to full-screen mode. Press the Escape key or double-click the full-screen image to return to the
standard Live View screen.
2. Zoom (Digital Zoom Window)
Clicking Digital Zoom opens the Digital Zoom window. Use the slider to
magnify the camera view to a small area of the screen.
The Live View will only remain at this zoom level and area selection for the
current viewing session. When the user leaves Live View, the zoom level
resets to 100%.
3. Audio Out
Click to toggle audio to the built-in speaker/Audio Out port on or off.
4. Audio In
Click to toggle the camera microphone on and off.
5. Record
Record the current live stream to an .AVI video file that is saved to the PC or a network drive. A window opens for selecting
the storage location each time recording is started. Press Record again to stop the recording. The quality of this recording will
vary based on the bandwidth of the connection to the camera and the processing power of the local computer.
6. Photo
Takes a JPEG snapshot of the current image that can be saved to the PC or a network drive.
7. Config
Click to enter the Configuration menus. All network and camera settings are configured in this menu. You must be logged in
with administrator privileges to access the Configuration Menu.
© 2014 Wirepath Surveillance
1 2 3 4
WPS-750-DOM-IPH Installation Manual
5 6 7
17