Time Setting; Network Led - Wirepath Surveillance WPS-750-DOM-IPH Installation Manual

10.2.1.3. Time Setting

Server Time
3
Date Format
Time Zone
Enable
Daylight
Savings Time
Time setup options are detailed in section
Click "Apply" at the bottom right of the page to save modified settings.

10.2.1.4. Network LED

Enable or disable the network status lights on the RJ45 connector (back of the camera) The LEDs are useful for setup
4
and diagnostics, but may cause unwanted color reflections behind the camera during regular use.
© 2014 Wirepath Surveillance
3
4
Current time based on the settings saved in the camera.
Select the order in which days (d), months (m), and years (y) are displayed.
(Only available for NTP and Manual mode) Set the camera time zone in hours ahead of or behind
Greenwich Mean Time (GMT).
Check to enable Daylight Savings Time Settings. When this setting is enabled, DST start and end times
may be set. Default times are standard for most participating regions.
10.2.2. Camera Time
WPS-750-DOM-IPH Installation Manual
Setup.
21