6.1. Network Cable Recommendation (PoE and non-PoE)
•
Cable Type: Cat5e/6
•
Max Length: 100 meters (328 feet)
•
Termination: 568B recommended
6.2. Choosing the Right Network Equipment
Streaming content from IP Cameras requires more bandwidth than most IP devices. We recommend using 1Gbps routers and
switches to maintain a high quality streaming image. To reduce traffic on the overall network, we also recommend that all IP
Surveillance devices be connected to a dedicated 1Gbps switch or VLAN.
6.3. PoE Requirements- IEEE 802.3af
Cameras must be connected to a PoE injector (inline PoE power supply) or a PoE-equipped port of a network router or switch built
to IEEE 802.3af standards. Consider installing a dedicated PoE switch specifically for IP cameras on the network to avoid issues
relating to power shortage.
•
Minimum requirement for PoE ports:
•
Voltage: 44V DC
•
Wattage: 15.4W
•
Amperage: 350mA
© 2014 Wirepath Surveillance
TIA/EIA Standard 568-B (
Gold Pins Facing Up
Pin 1
White/Orange
Pin 5
White/Blue
Pin 2
Orange
Pin 6
Green
Pin 3
White/Green
Pin 7
White/Brown
Pin 4
Blue
Pin 8
Brown
WPS-750-DOM-IPH Installation Manual
)
11