Advanced Ip Settings - Https Access Setup; Created Request; Installed Certificate; Connection Types - Wirepath Surveillance WPS-750-DOM-IPH Installation Manual

10.3.2. Advanced IP Settings - HTTPS Access Setup

Accessing the Camera through HTTPS provides an additional security level for the video stream by requiring certificate
authentication. To use this feature, a certificate must be created and then verified by a third party. To set up HTTPS access
correctly, contact the HTTPS verifier.
Note: Wirepath™ Surveillance does not provide HTTPS certificates.
• Navigation: Log in as an administrator. From Home Screen, click "Config" button in top right corner, then click "Advanced" in
left column, then click "ONVIF" from the sub-menu that opens.

10.3.2.1. Created Request

Subject
1
Date
Content
Remove

10.3.2.2. Installed Certificate

Subject
2
Date
Content
Remove

10.3.2.3. Connection Types

Select HTTP, HTTPS, or HTTP & HTTPS. We recommend that this be set to "HTTP & HTTPS" unless all PCs will have
3
the HTTPS certificate installed.
© 2014 Wirepath Surveillance
1
2
3
Displays the subject content of the loaded certificate.
Displays the certificate creation date.
Click Content to display the content of the certificate. Click Remove to remove the certificate.
Click Remove to remove the certificate.
Displays the subject content of the loaded certificate.
Displays the certificate creation date.
Click Content to display the content of the certificate. Click Remove to remove the certificate.
Click Remove to remove the certificate.
WPS-750-DOM-IPH Installation Manual
33