Special Menus; Cam Title Setting; Motion Detection - Wirepath Surveillance WPS-565-DOM-A Installation Manual

6.4.7. SPECIAL Menus

6.4.7.1. CAM TITLE Setting

The CAM TITLE sub-menu provides the ability to set a camera name and have it
appear on the screen.
• CAM TITLE — Set to ON to display the camera name on the screen.
• Set a camera name by selecting one letter/number at a time using the menu
at the bottom of the screen. Assigning a name that highlights the location of
the camera such as Lobby, Main Hall, etc. is recommended.
• Press CLR to clear all letters, press POS to choose the position of CAM NAME on
the screen, and press END to exit the menu.

6.4.7.2. MOTION Detection

Motion Detection allows for up to 4 zones of motion detection. When an
object in one of the zones moves, the camera will highlight motion in magenta
rectangles. This allows for monitoring motion more efficiently.
Scroll left or right to set MOTION DET to ON and enter into the Motion sub-menu.
• AREA SEL. — Select from zones 1~4 to adjust the motion detection settings of
that area(zone).
• AREA STATE — Set to ON to display the detection zone on the screen: set to
OFF to hide the detection zone on the screen.
• Customize the size and the position of each detection zone by adjusting
HEIGHT, WIDTH, LEFT/RIGHT, TOP/BOTTOM values.
• DEGREE — Increase to raise motion detection sensitivity.
• VIEW — When set to ON, the screen will highlight motion of the moving object
with magenta rectangles.
© 2014 Wirepath Surveillance
MOTION
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
RETURN
WPS-565-DOM-A Installation Manual
AREA1
ON
|
010
| | | | | | | | | | | | | | |
|
004
| | | | | | | | | | | | | | |
|
005
| | | | | | | | | | | | | | |
|
005
| | | | | | | | | | | | | | |
|
040
| | | | | | | | | | | | | | | |
ON
RET
21