How To Configure Day & Night Settings (Color Modes); Day & Night Modes - Wirepath Surveillance WPS-750-DOM-IPH Installation Manual

WPS-750-DOM-IPH Installation Manual
10.4.2. How to Configure Day & Night Settings (Color Modes)
The camera can record an image in color or black-and-white mode. Color mode requires more light but provides the best image
given ideal conditions. Black and white requires much less light, and the camera's IR can be turned on to illuminate the scene.
If the camera view is not ideal after installation, adjustments can be made to optimize the automatic settings or set them manually.
10.4.2.1. Day & Night Modes
Select the mode from the Day and Night drop-down menu.
Light Sensor
Uses camera light sensor to switch between Color (Day) and B&W (Night) modes.
Mode
See section
(Default)
Forces camera to Color (Day) mode only. Useful for scenes that will be consistently lit and when color
Color Mode
video is always preferred. All sub-settings are disabled in Day mode. Use the Image Settings to adjust
(Day)
the picture. See section
B&W Mode
Forces camera to B&W (Night) mode only, increasing low-light performance. Useful for scenes that will
(Night) consistently be poorly lit.
Times Mode Forces camera to switch between Color and B&W modes at specific times.
If the camera view is not ideal after installation, adjustments can be made to optimize the automatic settings.
46
10.4.2.3. Light Sensor Mode (Default Mode)
10.4.1. Image Settings Menu.