Demonstration Software; Order Code; Unpacking Recommendations - STMicroelectronics STM32L476G-EVAL User Manual

Overview
1.2

Demonstration software

Demonstration software is preloaded in the STM32L476ZGT6 Flash memory, for easy
demonstration of the device peripherals in stand-alone mode. For more information and to
download the latest available version, refer to the STM32L476G-EVAL demonstration
software available on www.st.com.
1.3

Order code

To order the evaluation board based on the STM32L476ZGT6 MCU, use the order code
STM32L476G-EVAL.
1.4

Unpacking recommendations

Before the first use, make sure that, no damage occurred to the board during shipment and
no socketed components are loosen in their sockets or fallen into the plastic bag.
In particular, pay attention to the following components:
1. quartz crystal (X2 position)
2. microSD card in its CN18 receptacle
3. RF-EEPROM board (ANT7-M24LR-A) in its CN3 connector
For product information related with STM32L476ZGT6 microcontroller, visit www.st.com.
10/100 DocID027351 Rev 3
UM1855