Ide Channel 0 Master/Slave And Ide Channel 1 Master/Slave - Kontron MBATX-945G-VGA User Manual

IDE Channel 0 Master/Slave and IDE Channel 1 Master/Slave

Move the cursor to a field then press <Enter>.
The settings on the screen are for reference only. Your version may not be identical to this one.
IDE HDD Auto Detection
Detects the parameters of the drive. The parameters will automatically be shown on the
screen.
IDE Channel 0 Master/Slave and IDE Channel 1 Master/Slave
The drive type information should be included in the documentation from your hard disk
vendor. If you select "Auto", the BIOS will autodetect the HDD & CD-ROM drive at the
POST stage and show the IDE for the HDD & CD-ROM drive. If a hard disk has not
been installed, select "None".
Access Mode
For hard drives larger than 528MB, you would typically select the LBA type. Certain
operating systems require that you select CHS or Large. Please check your operating
system's manual or Help desk on which one to select.
Capacity
Displays the approximate capacity of the disk drive. Usually the size is slightly greater
than the size of a formatted disk given by a disk checking program.
Cylinder
This field displays the number of cylinders.
MBATX-945G-VGA User's Guide page 67