Table of Contents
Advertisement
the cable or the serial device has a problem. If the serial device works, the
problem may be due to the onboard I/O or the address setting.
4.
Make sure the COM settings and I/O address are configured correctly.
Keyboard
Nothing happens when a key on the keyboard was pressed.
1.
Make sure the keyboard is properly connected.
2.
Make sure there are no objects resting on the keyboard and that no keys are
pressed during the booting process.
System Board
1.
Make sure the add-in card is seated securely in the expansion slot. If the
add-in card is loose, power off the system, re-install the card and power up
the system.
2.
Check the jumper settings to ensure that the jumpers are properly set.
3.
Verify that all memory modules are seated securely into the memory sockets.
4.
Make sure the memory modules are in the correct locations.
5.
If the board fails to function, place the board on a flat surface and seat all
socketed components. Gently press each component into the socket.
6.
If you made changes to the BIOS settings, re-enter setup and load the BIOS
defaults.
page 120
MBATX-945G-VGA User's Guide
Advertisement
Table of Contents
