7.6. Speaker Connector (CN10 & CN15)
The Speaker audio-out interface is available through the wafers CN10 and CN15. These outputs are shared with the
audio output (Line-out) signals of the audio pin header CN9. With up to 100 dB Signal-to-Noise Ratio (SNR).
Figure 17: 3W Audio AMP Output Wafer CN10 (Left Channel), CN15 (Right Channel)
Table 27: Pin Assignment CN8
Pin
Signal
1
Speaker+
2
Speaker-
7.7. Audio Connector (CN9)
The audio connector provides audio output (Line-Out), audio input (Line-In) and microphone (Mic-In) signals through
the wafer CN9. The audio output signals are shared with those of the speaker connectors CN10 & CN15. The Signal-to-
Noise Ratio (SNR) is up to 100dB.
Figure 18: Audio Input / Output Pin Header CN9
Table 28: Pin Assignment CN8
Pin
Signal
1
MIC-In_L
2
MIC-In_R
3
MIC-In_JD#
4
GND
5
Line-In_L
6
Line-In_R
7
Line-In_JD#
8
GND
9
Line-Out_L
10
Line-Out_R
www.kontron.com
Note
1
11
Note
2
12
ECX-KBL-U - User Guide, Rev. 1.0
// 38