Dual Function Power Button; Wake-On-Ring; Wake-On-Lan; Wake-On-Ps/2 Keyboard/Mouse - Kontron MBATX-945G-VGA User Manual

Dual Function Power Button

Depending on the setting in the "Soft-Off By PWR-BTTN" field of the Power
Management Setup, this switch will allow the system to enter the Soft-Off or Suspend
mode.

Wake-On-Ring

This feature allows the system that is in the Suspend mode or Soft Power Off mode to
wake-up/power-on to respond to calls coming from an external modem or respond to
calls from a modem PCI card that uses the PCI PME (Power Management Event) signal
to remotely wake up the PC.
Note:
your power supply must support a minimum of ≥720mA.

Wake-On-LAN

This feature allows the network to remotely wake up a Soft Power Down (Soft-Off) PC.
It is supported via the onboard LAN port or via a PCI LAN card that uses the PCI PME
(Power Management Event) signal. However, if your system is in the Suspend mode,
you can power-on the system only through an IRQ or DMA interrupt.
Note:
≥720mA.

Wake-On-PS/2 Keyboard/Mouse

This function allows you to use the PS/2 keyboard or PS/2 mouse to power-on the
system.
Note:
≥720mA.
page 24
If you are using a modem add-in card, the 5VSB power source of
The 5VSB power source of your power supply must support
The 5VSB power source of your power supply must support
MBATX-945G-VGA User's Guide