Kontron mITX-DNV Quick Installation Manual

Kontron mITX-DNV Quick Installation Manual

Hide thumbs Also See for mITX-DNV:

Advertisement

Quick Links

mITX-DNV - QUICK INSTALLATION GUIDE
Thank you for purchasing the Kontron mITX-DNV embedded board. This document provides information to allow you to quickly
install this product.

Packing Checklist

1.
Take the mITX-DNV out of the packing box and check if the unit is properly secure in the plastic bag.
2.
Check the contents of the carton box: (*: optional)
mITX-DNV main board
Rear I/O Shield
SATA Cable*
COM Port Cable*
DIO Cable*
2-Ports USB 2.0 Cable*
PS/2 Cable*
3G / 4G Micro SIM Card Holder Kit*
mITX-DNV - Quick Installation Guide - Version 1.2
www.kontron.com
//
// 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mITX-DNV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kontron mITX-DNV

  • Page 1 Thank you for purchasing the Kontron mITX-DNV embedded board. This document provides information to allow you to quickly install this product. Packing Checklist Take the mITX-DNV out of the packing box and check if the unit is properly secure in the plastic bag. Check the contents of the carton box: (*: optional) ...
  • Page 2 Flash Security Override Selection JP15 Power Output Selection for COM1 Pin-9  Internal Connector List Item Designation Description ATX1 2x12-Pin ATX Power Input Wafer FAN1 CPU FAN Wafer FAN2 System FAN Wafer www.kontron.com // 2 mITX-DNV - Quick Installation Guide - Version 1.2...
  • Page 3  mPCIe / mSATA Selection for MPCIE1 (JP1) Jumper Position Description Pin 1-2 Pin 2-3 mPCIe mSATA “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 3 mITX-DNV - Quick Installation Guide - Version 1.2...
  • Page 4 AT / ATX Power Mode Selection (JP3) Jumper Position Description Pin 1-2 Pin 2-3 ATX Power Mode AT Power Mode “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 4 mITX-DNV - Quick Installation Guide - Version 1.2...
  • Page 5  Flash Security Override Selection (JP11) Jumper Position Description Pin 1-2 Pin 2-3 Normal Flash Security Override “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 5 mITX-DNV - Quick Installation Guide - Version 1.2...
  • Page 6 GbE LAN3, 4 RJ45 Connector CN20 GbE LAN5, 6 RJ45 Connector CN22 USB 3.0 Port 3, 4 Connector CN23 USB 3.0 Port 1, 2 Connector CN24 VGA Connector CN26 RS232/422/485 COM1 Connector www.kontron.com // 6 mITX-DNV - Quick Installation Guide - Version 1.2...

Table of Contents