Kontron MBATX-945G-VGA User Manual page 81

On-Chip Serial ATA Setting
On-Chip Serial ATA
Disabled
Auto
Combined Mode
Enhanced Mode
SATA Only
SATA Port Speed Settings
Force GEN 1
Force GEN 2
PATA IDE Mode
This field is used to select the function mode for the IDE 1 connector and its relation to
the SATA ports.
Primary IDE 1 serves as Primary Master and Primary Slave channel. SATA 2
and SATA 4 serve as Secondary Master and Secondary Slave channel.
SATA 1 and SATA 3 are disabled.
Secondary IDE 1 serves as Secondary Master and Secondary Slave channel.
SATA 1 and SATA 3 serve as Primary Master and Primary Slave
channel. SATA 2 and SATA 4 are disabled.
SATA Port
If the "PATA IDE Mode" field is set to Primary, this field will show "P1, P3 is Secondary";
meaning SATA 2 and SATA 4 are Secondary.
If the "PATA IDE Mode" field is set to Secondary, this field will show "P0, P2 is Primary";
meaning SATA 1 and SATA 3 are Primary.
MBATX-945G-VGA User's Guide
Disables the onboard SATA.
The system will detect the existing SATA and IDE drives then
automatically set them to the available master/slave mode.
This option allows you to use both IDE and SATA drives; allowing
a maximum of 4 drives -1 IDE Master, 1 IDE Slave and 2 SATA.
You must manually set the SATA and PATA drives' mode in the
"PATA IDE Mode" and "SATA Port" fields.
This option allows you to use both IDE and SATA drives; allowing
a maximum of 6 drives -1 IDE Master, 1 IDE Slave and 4 SATA.
This option automatically sets the SATA drives to Primary Master
mode. Since the SATA drives are in Master mode, you cannot set
the IDE drive to Master mode.
SATA will run at 1.5Gb/s which is the first generation SATA speed.
SATA will run at 3Gb/s which is the second generation SATA
speed.
page 81