Installing The Dimm - Kontron MBATX-945G-VGA User Manual

Installing the DIMM

A DIMM simply snaps into a DIMM socket on the system board. Pin 1 of the DIMM
must correspond with Pin 1 of the socket.
1. Pull the "tabs" which are at the ends of the socket to the side.
2. Position the DIMM above the socket with the "notch" in the module aligned with
the "key" on the socket.
3. Seat the module vertically into the socket. Make sure it is completely seated. The
tabs will hold the DIMM in place.
MBATX-945G-VGA User's Guide page 31