I/O Connectors; S/Pdif-Out - Kontron MBATX-945G-VGA User Manual

Driver Installation
Install the Audio Drivers. An audio software application program will at the same time be
installed into your system. Refer to chapter 4 for more information.

I/O Connectors

CD-in Internal Audio Connector
The CD-in (J6) connector is used to receive audio from a CD-ROM drive, TV tuner or
MPEG card.

S/PDIF-out

The system board is equipped with a S/PDIF-out connector. One card-edge bracket,
mounted with the S/PDIF port, may be provided with the system board. Install the card-
edge bracket to the system chassis then connect the audio cable connector to J7. Make
sure pin 1 of the audio cable connector is aligned with pin 1 of J7.
MBATX-945G-VGA User's Guide page 51