Table of Contents
Advertisement
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB device to wake
up a system from the S3 (STR - Suspend To RAM) state. To use this function:
• Jumper Setting:
JP2 and/or JP3 must be set to "2-3 On: 5VSB". Refer to "USB Power Select" in this
chapter for more information.
• BIOS Setting:
"USB KB Wake-Up From S3" in the Power Management Setup submenu of the
BIOS must be set to Enabled. Refer to chapter 3 for more information.
Important: If you are using the Wake-On-USB Keyboard/Mouse function for 2
USB ports, the 5VSB power source of your power supply must support ≥1.5A.
For 3 or more USB ports, the 5VSB power source of your power supply must
support ≥2A.
page 48
MBATX-945G-VGA User's Guide
Advertisement
Table of Contents
