Power-On Select - Kontron MBATX-945G-VGA User Manual

Power-on Select

J15 is used to select the method of powering on the system. If you want the system to
power-on whenever AC power comes in, set J15 to Short. If you want to use the power
button, set J15 to Open.
Important: If you want the system to automatically power-on when power
returns after an AC power failure, you must:
1. Set J15 to Short.
2. The PWR Lost Resume State field must be set to "Turn On". (Power
Management Setup of the BIOS).
MBATX-945G-VGA User's Guide page 41