Pnp/Pci Configurations; Init Display First; Reset Configuration Data - Kontron MBATX-945G-VGA User Manual

PnP/PCI Configurations

This section describes configuring the PCI bus system. It covers some very technical
items and it is strongly recommended that only experienced users should make any
changes to the default settings.
The settings on the screen are for reference only. Your version may not be identical to this one.

Init Display First

This field is used to select whether to initialize the onboard VGA, PCI Express or PCI
first when the system boots.
Onboard When the system boots, it will first initialize the onboard VGA.
PCIEx When the system boots, it will first initialize the PCI Express x16
graphics card.
PCI Slot When the system boots, it will first initialize PCI.

Reset Configuration Data

Enabled The BIOS will reset the Extended System Configuration Data (ESCD)
once automatically. It will then recreate a new set of configuration data.
Disabled The BIOS will not reset the configuration data.
MBATX-945G-VGA User's Guide page 91