Audio (Rear Audio And Front Audio) - Kontron MBATX-945G-VGA User Manual

Audio (Rear Audio and Front Audio)

Rear Audio (CN3)
• Mic-in Jack (Pink)
This jack is used to connect an external microphone.
• Line-in Jack (Light Blue)
This jack is used to connect any audio devices such as Hi-fi set, CD player,
tape player, AM/FM radio tuner, synthesizer, etc.
• Line-out Jack (Lime)
This jack is used to connect a headphone or external speakers.
Front Audio
The front audio connector (J2) allows you to connect to the line-out and mic-in jacks that
are at the front panel of your system. Using this connector will disable the rear audio's
line-out and mic-in functions. Remove the jumper caps from pins 5-6 and pins 9-10 of
J2 prior to connecting the front audio cable connector. Make sure pin 1 of the cable
connector is aligned with pin 1 of J2. If you are not using this connector, make sure to
replace the jumper caps back to their original pin locations.
Pins 5-6 and 9-10 short
(default)
Pins 5-6 and 9-10 open The front audio is enabled.
page 50
The front audio is disabled.
The rear audio is enabled.
The rear audio is disabled.
MBATX-945G-VGA User's Guide