Ps/2 Power Select - Kontron MBATX-945G-VGA User Manual

7. Press <Esc> to return to the main menu of the BIOS setup utility. Select "Save &
Exit Setup" and press <Enter>.
8. Type <Y> and press <Enter>.

PS/2 Power Select

JP1 is used to select the power of the PS/2 keyboard or PS/2 mouse port. Selecting
5VSB will allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system.
BIOS Setting
Configure the PS/2 keyboard/mouse wake up function in the Integrated Peripherals
submenu ("Super IO Device" section) of the BIOS. Refer to chapter 3 for more
information.
Important: The 5VSB power source of your power supply must support
≥720mA.
MBATX-945G-VGA User's Guide page 39