Advertisement
Quick Links
mITX-KBL - QUICK INSTALLATION GUIDE
Thank you for purchasing the Kontron mITX-KBL embedded board. This document provides information to allow you to quickly
install this product.
Packing Checklist
1.
Take the mITX-KBL out of the packing box and check if the unit is properly secure in the plastic bag.
2.
Check the contents of the carton box: (*: optional)
mITX-KBL main board
Rear I/O Shield
COM Port Cable*
DIO Cable*
USB 3.0 Cable*
2-Port USB 2.0 Cable*
SATA Cable*
PS/2 Cable*
VGA Cable*
3G Mini SIM Card Holder Kit*
mITX-KBL - Quick Installation Guide - Version 1.0
www.kontron.com
//
// 1
Advertisement
Related Manuals for Kontron mITX-KBL
Summary of Contents for Kontron mITX-KBL
-
Page 1: Packing Checklist
Thank you for purchasing the Kontron mITX-KBL embedded board. This document provides information to allow you to quickly install this product. Packing Checklist Take the mITX-KBL out of the packing box and check if the unit is properly secure in the plastic bag. Check the contents of the carton box: (*: optional) ... -
Page 2: Jumper And Internal Connector Locations
JP10 Backlight Power Enable Selection for LVDS1 JP11 Panel & Backlight Power Selection for LVDS1 JP12 Pin-9 Selection for COM1 JP13 ME F/W Selection JP14 Pin-9 Selection for COM2 www.kontron.com // 2 mITX-KBL - Quick Installation Guide - Version 1.0... - Page 3 Serial ATA Port-1 Connector SATA3 Serial ATA Port-2 Connector SATA4 Serial ATA Port-3 Connector DIMM1 DDR4 Memory SO-DIMM Socket DIMM2 DDR4 Memory SO-DIMM Socket LVDS1 Primary 24-bit, 2-channel LVDS Panel Connector www.kontron.com // 3 mITX-KBL - Quick Installation Guide - Version 1.0...
-
Page 4: Jumper Settings
Pin 2-3 Normal (default position) Clear RTC CMOS (board does not boot with the jumper in this position) “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 4 mITX-KBL - Quick Installation Guide - Version 1.0... - Page 5 “X” = Jumper set (short) and “-” = jumper not set (open) Keyboard Lock Selection (JP6) Jumper 1 Position Description Pin 1-2 Pin 2-3 Normal Keyboard Locked “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 5 mITX-KBL - Quick Installation Guide - Version 1.0...
- Page 6 Backlight Enable Voltage = +5V Jumper 2 Position Description Pin 2-4 Pin 4-6 Active High Active Low “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 6 mITX-KBL - Quick Installation Guide - Version 1.0...
- Page 7 Jumper Position Description Pin 1-2 Security Measures Defined by BIOS are Over-written Security Measures Defined are Set “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 7 mITX-KBL - Quick Installation Guide - Version 1.0...
- Page 8 Pin 4-5 COM1, Pin-9 = +12V COM1, Pin-9 = +5V COM1, Pin-9 = +5V COM1, Pin-9 = RI “X” = Jumper set (short) and “-” = jumper not set (open) www.kontron.com // 8 mITX-KBL - Quick Installation Guide - Version 1.0...
-
Page 9: Real I/O Panel Connector Locations
USB2.0 Port-9, 10 CN22TOP RS-232 / 422 / 485 COM2 Connector CN22BOT RS-232 / 422 / 485 COM1 Connector CN23 Display Port B Connector CN24 Display Port A Connector www.kontron.com // 9 mITX-KBL - Quick Installation Guide - Version 1.0...