Set Supervisor Password - Kontron MBATX-945G-VGA User Manual

Set Supervisor Password

If you want to protect your system and setup from unauthorized entry, set a supervisor's
password with the "System" option selected in the Advanced BIOS Features. If you
want to protect access to setup only, but not your system, set a supervisor's password
with the "Setup" option selected in the Advanced BIOS Features. You will not be
prompted for a password when you cold boot the system. Use the arrow keys to
highlight "Set Supervisor Password" and press <Enter>.
Type in the password. You are limited to eight characters. When done, the message
below will appear:
Confirm Password:
You are asked to verify the password. Type in exactly the same password. If you type in
a wrong password, you will be prompted to enter the correct password again. To delete
or disable the password function, highlight "Set Supervisor Password" and press
<Enter>, instead of typing in a new password. Press the <Esc> key to return to the main
menu.
page 98 MBATX-945G-VGA User's Guide