Power Management Setup
The Power Management Setup allows you to configure your system to most effectively
save energy.
The settings on the screen are for reference only. Your version may not be identical to this one.
ACPI Function
This function should be enabled only in operating systems that support ACPI. Currently,
only Windows® 2000/ME/XP supports this function. If you want to use the Suspend to
RAM function, make sure this field is enabled then select "S3(STR)" in the "ACPI
Suspend Type" field.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS when it wakes up
from the S3 state. This can be configured only if the "ACPI Suspend Type" field is set to
"S3(STR)".
MBATX-945G-VGA User's Guide
page 87