How To Enter The Bios Setup - Inspur TS860 User Manual

Hence when there are operating problems in the system due to the option altered, the setup can
revert.
2. Ordinarily the factory default system value is the optimized setup. Don't try to alter the
parameters before you understand their denotations.
3. The common setup is introduced in detail in this paper. The less referred options in the
application procedure are simply explained or not.
4. The content of the BIOS is diverse based on the different configurations of the products;
hence the detailed introduction is elided.

How to Enter the BIOS Setup

Power on and start the server, when displaying the Inspur logo, "Press Esc for Boot menu"
shows at the bottom of the screen, then press【ESC】 button, and system enters into BIOS setup
screen.
If fails to enter into the setup screen, please reset the system by pressing 【 Ctrl】 - 【Alt】 - 【Del】
at the same time and then repeat the above operation.
Based on the above described operation, you can enter BIOS main interface, which mainly
includes the options as shown below。
In this interface, CPU type, memory and BIOS version are also available.
Option
Continue overleap BIOS setup, continue the system-bootable operation
Description