Inspur TS860 User Manual page 5

Notes：
1、 Please firstly install the separately-packaged computing modules into the host chassis
before official usage.。
2、 Before unpacking the product, it is necessary to confirm the correspondence between
host chassis box and module box according to the labels on the packaging box. Install
the host chassis and computing module with the same serial numbers and do not mixed.
install them with different numbers, otherwise the system will not function properly.
3、 During the installation and dismantlement of machine modules, you should wear the
attached anti-static gloves to protect components from electrostatic damage; the
anti-static gloves are placed in the general accessories box in the host chassis box.
Unpack host
1、 Split the rubber seal on the box with paper cutter and take out host panel, power cord
and accessory box on the pad in the box for subsequent use, and then remove the pad
from the box.
2、 Take out the rails on the side of the host from the box.
3、 Take out the host packaging plastic bag and place the host on the working table.
Note： If you plan to install the server in the cabinet, please refer to the attached "Quick Guide"
for installation instruction after carrying out the host.
Unpack computing modules
TS860 server system concludes two computing modules which are separately packaged in
one box upon receipt. Then 2 processing modules are packaged by carton as whole.