Table of Contents
Advertisement
Figure 1-4 Illustration for Opening Chassis Upper Cover
Chapter Two System BIOS
How to Enter the BIOS Setup
2.1
Power on the server, system starts to boot, when the following content appears at the bottom
of the screen:
"Press <DEL> to SETUP or <TAB> to POST", press [ DEL ] key, wait to enter system BIOS
Setup.
If system fails to enter configuration program according to the above operation, please press
[Ctrl]-[Alt]-[Del] to restart system, repeat the above operation (if [ DEL ] key is pressed after seeing
the above content, complete the press action immediately).
Note: Some items in BIOS are unable to be configured, i.e. some system auto-detection and
configuration information. There's a right indicator in front of some items, indicating that if this
item is selected,, press [Enter] key, cascade menu of it (which is sub-menu) will display on the
screen.
2.2
BIOS System Menu Introduction
This chapter mainly introduces the following main function menus, as well as notes in
BIOS.
Function Menu:
NX5760M3 Computer Blade Server
10
Advertisement
Table of Contents
